|
Some LC-11 control surfaces were manufactured with the Overlay buttons in the following order:
DDR1, DDR2, TXT, EXT
Whereas TriCaster 2.0's Live Production tab will show the Overlay buttons in this order:
EXT, DDR1, DDR2, TXT
So DDR1 on the LC-11 will actually activate EXT in the TriCaster. The buttons work in the same order, but they were placed in a different order. Unfortunately the LC-11s were manufactured before some final UI (User Interface) tweaks were made in TriCaster 2.0
The Overlay buttons on the LC-11 are slightly different than the clear buttons that are intended to pop off with little effort on the Effects, Live and Preview rows. However they do pop off just the same and require a bit more effort but present no risk in damaging any hardware. |
The TriCaster VM (also the RS-8) dimensions are as follows:
Height: 1 5/8"
Width: 15"
Length: 6 1/8"
The LC-11 dimensions are as follows:
Height: 1 5/8"
Width: 17"
Length: 6 3/4" |
|
|
The Overlay buttons on the LC-11 do not match what is in the interface!
