Amiga Video Toaster / Flyer FAQs
  Amiga Flyer
    Flyer Hardware Issues
      Double Termination

Product: Toaster Flyer

Platforms: 2000 3000 3000T 4000 4000T

Problem: System Hangs When Toaster/Flyer software is Run - No Error Message

This can occur if the program output is double-terminated; an example would be that program out is going to a record deck and a monitor which both have termination on. To test, simply detach the cable on the program output of the Toaster, and if the loading process resumes and finishes up a normal load, then termination on program out was the issue.

Make sure that termination is on only in the last device on the video chain. If the problem is a device with faulty termination level, refer to a repair shop. If the problem has occurred due to the use of a T-connector on program output, eliminate the T-connector and use a distribution amplifier to send the Toaster output to multiple destinations.