Amiga Video Toaster / Flyer FAQs
  Amiga Flyer
    Flyer Hardware Issues
      Power Problems and The Flyer

Product: Flyer

Platforms: 2000 3000 3000T 4000 4000T

Problems: Flyer is Flakey, errors vary, not predictable.

1. Check to see if the Flyer is one of the recall boards.

   See also: Flyer Recall Boards

2. Check for correct voltage going to Flyer.

   There is a barrel shaped ferrite bead power supply line filter just to the right of the Flyer logo.

   Using a meter measure voltage, it should read 4.7V - 5.0V. Anything lower than this range can cause the Flyer to malfunction. Look into replacing the Amiga power supply if you have this problem.

NewTek provides a schematic for other power and clock checks. Contact Technical Support for a copy.