The Tip Jar

NewTek Studio | Join Mailing List

Lighting Your Green Screen Subjects to Blend with the Intended Background

March 10, 2015 by Jeff Foster

Are you planning your green screen shoot with an intended background in mind – like a virtual set or solid colored panel? Or are you going to create your background to match the shots you get? There is a lot of planning you need to consider before lighting your green screen production, and knowing how best to fit your subject into the background when you composite them is one of the first steps.

Lighting and Camera Angles

Most basic green screen shots require a straight-on shot of your subject posed in whatever direction they need to face in order to interact with the intended scene. Your camera is directly opposite the green screen, and the subject is sandwiched somewhere in between, usually facing the camera or perhaps engaging with another subject on-set.

But having the right angle to the subject and correctly cropping the subject in frame are what will sell the final composition. If you have a detailed storyboard and your background clips or images or virtual set is already designed and available, then it’s much easier to line up your green screen shot and position the camera and subjects in the correct location.

FIG 02

In this case, the background footage was shot on a location with the camera locked-off on a tripod. I simulated the low, soft lighting of the restaurant in the green screen shot so the two videos would match correctly. Because this subject didn’t need to interact with the bar surface—she was seated in front of it—a simple, straight-on angle was needed, although I had to lower the camera to match the height of the original background shot so the final composite looked believable.

I set up the lighting on the subject to emulate the surroundings she was to be placed into, with a strong key light coming down onto her face as if she were under track lighting, and soft fill light from her left side and no back light or hair light needed. With the green screen properly lit and your subject is far enough away from it, you can adjust the lighting of your subject any way you wish so they blend in with the background plate seamlessly.

Without changing the lighting of your green screen background, you can easily alter the lighting on your subjects to place them in various environments, simply by keeping them well in front of the green screen (at least 8-10ft) and lighting them for the intended scene.

FIG 03

In this case, a primary key light was used with little or no fill, causing the subject to be partially silhouetted against the green screen. The composite was enhanced to eliminate color spill and an edge glow for the desired moonlight film effect.

I was able to demonstrate this lighting technique at a live green screen production workshop at NAB last year, where I asked my subject to stand and pretend she was driving a car while I positioned the camera to frame her correctly in the shot. I used one small LED light on her from a low angle to emulate a “glow” from the dashboard as if she was driving the car at night.

FIG 04a FIG 04b

Shooting to Retain Wanted Shadows

If your subject must come in contact with a background or prop surface, and you need to retain their natural shadows for the composited effect, then you must be especially careful with your green screen setup and lighting to get the right balance of lighting on your subject and the screen itself.

The biggest issue is higher noise in the green channel, resulting in a grainy matte in the shadow areas. This sometimes gives the shadows on the surface an appearance of moving particles dancing around instead of a smooth shadow, depending on the amount of threshold and smoothness control applied to your key. If the background that the drop shadow is over is more complex in texture the better your results will be.

The object is to get the strongest light source on the subject and cast a shadow in the direction you need onto the green screen surface, while using smaller fill and rim lights to light only the subject and not the screen if at all possible. I recommend using a stretched fabric such as a Lastolite pop-up screen because there is less chance of bounce-back fill than if you use a painted wall and floor.

FIG 05

In this example, I used one portable Kino Flo Diva 400 as the main key light source which also produces the primary shadow on the green screen fabric surface, with two Kino Flo Bar Flys to fill the sides of the subject and another Diva 400 set low and farther back for a soft fill.

Changing Backgrounds to Alter the Mood of a Scene

Scene and set selection is a very important part of telling your story or giving a specific feeling to your production. Sometimes subtle adjustments in lighting color temperature of your foreground plate can alter the scene, but also background scene selection can greatly change the mood as well.

In this example I tried two different approaches to creating an exterior background for a foreground shot that had green screen paper applied to the outside windows. The camera dollies in on the window and focuses on the candelabra next to the tree.

To create a contrasting ambiance, I selected a cooler-colored winter city shot and added a layer of heavy snow particles between the two plates. The color palette of the entire scene contrasted greatly with the warm and homey atmosphere of the second approach; in that case, the background was closer to the window and lit up at night with the glow of holiday lights.

FIG 06

The two different backgrounds used actually alter the mood of the scene and identify the location, even though the foreground plate is the same warm holiday living room setting. The top one gives a feeling that you’re in a high-rise apartment but doesn’t have the same cozy and warm feeling that the snowman in the yard gives the scene.

Portions of this article have been excerpted from The Green Screen Handbook, 2nd Edition (Focal Press, pub.) by Jeff Foster

©2015 Jeff Foster – PixelPainter.com

 

TriCaster, Virtual Sets,

Green Screen, Lighting, Tip, TriCaster, Virtual Sets,


Related Stories

How to Produce Broadcast-Quality Events with the NewTek TriCaster 40

Video production and streaming expert Jan Ozer offers a comprehensive two-part tutorial on producing broadcast-quality live events with TriCaster 40....

Quick Tip from the John Lennon Tour Bus: TriCaster Clean Program Output

Check out a quick down and dirty tip from the John Lennon Tour Bus. Get both a final live video...

Custom Live Video Graphics with NewTek TriCaster

Customize title template in NewTek TriCaster for instant graphics for your live video productions. It’s easy to change color, add...

x
Chat with a Sales Specialist