NC1 Studio I/O Module
NC1 Studio I/O IP Module
Interoperability
NDI® and SDI
NDI® and SMPTE ST 2110
IP I/O
Up to 8x
Up to 4x
3G/HD/SD-SDI I/O
Up to 8x via HD-BNC
-
4K UHD I/O
Up to 2x via quad-link 3G-SDI
-
Media Playback Channels
Up to 8x
Up to 4x
Recording Channels
Up to 8x SDI Inputs Only
-
Supported Video Formats
- 2160p: 59.94, 50, 29.97, 25, 24, 23.976
- 1080p: 59.94, 50, 29.97, 25, 24, 23.976
- 1080i: 59.94, 50
- 720p: 59.94, 29.97, 25, 24, 23.976
- 576i 50
- 480i 59.94
- 1080p: 60, 59.94, 50
- 1080p/PsF: 30, 29.97, 25, 24, 23.98
- 1080i: 30, 29.97, 25
- 720p: 60, 59.94, 50
- 576i: 25
- 480i: 29.97
Supported Media Formats
- Video: AVI, DV, DVCPro, DVCProHD, FLV, F4V, H.263, H.264, MOV, MKV, MJPEG, MPEG, MP4, WMV, WebM, and more
- Image: PSD, PNG, TGA, BMP, JPEG, JPEG-XR, JPEG2000, EXR, RAW, TIF, WebP, and more
- Audio: AIFF, MP3, WAV, and more
Audio I/O
Up to 8x SDI embedded
-
Audio Networking
- Native support for network audio input and output via NDI®
- Embedded audio supported for all NDI® input and output video signals
- Support1 for Dante™, AES67, and ASIO protocols via compatible audio drivers
Signal Monitoring
Integrated waveform and vectorscope, full field rate with digital calibration, color preview and support for ITU-R Rec. 709
A/V Standards
- 4K UHD video conforms to SMPTE ST 2036 (UHDTV1 using Square Division Quad Split)
- 3G-SDI video conforms to SMPTE 424M (Level A)
- HD-SDI video conforms to SMPTE 292M
- SD video conforms to SMPTE 259M and ITU-R BT.656
- Analog audio levels conform to SMPTE RP-155
- Serial digital component 4:2:2 video in accordance with SMPTE ST 259M, ST 292M, and ST 425-AB
- Support for 16-bit, 20-bit, and 24-bit audio streams
Video Processing
Floating Point, YCbCr +A 4:4:4:4
8-bit and 10-bit YUV 4:2:2
Audio Processing
Floating Point, 96 kHz
48 kHz
Genlock
Genlock input supporting SD (Bi-level) or HD (Tri-level) reference signals
Supported over IP as per SMPTE ST 2059-2
Multiviewer
1x HDMI or DisplayPort
1x HDMI
NIC
2 x 1 Gigabit NIC
2 x 1 Gigabit NIC
2 x 10 Gigabit NIC2
2 x 10 Gigabit NIC2
System Physical
1RU chassis with 280W redundant PSU
19.0 x 1.75 x 16.75 in (48.3 x 4.5 x 42.5 cm) with rack ears attached
19.0 x 1.75 x 16.75 in (48.3 x 4.5 x 42.5 cm) with rack ears attached
1Compatible audio drivers and/or virtual sound card licenses required (sold separately)
2IEEE 802.3ae; optical; MSA-compatible SFP+ A and SFP+ B transceivers supported
Subject to change without notice.
NewTek Connect NC1 I/O Blackplane
- HDMI – monitor port
- Ethernet – network connections
- USB – connect keyboard, mouse and other peripheral devices.
- Motherboard audio connectors
- Genlock and SDI In/Out – current generation units (designated ‘Mark M’) provide HD-BNC connectors (High Density BNC); earlier (Mark D) units employ DIN 1.0/2.3 (Mini BNC) connectors
- Power
NewTek Connect NC1 I/O IP Blackplane
- HDMI – monitor port
- Ethernet – network connections
- USB – connect keyboard, mouse and other peripheral devices.
- RESERVED –HD-BNC connector (High Density BNC)
- SFP A and SFP B
- Power
Where to Buy NewTek Products
NewTek has a network of resellers located around the world. All of them are experts in our product and in the video production and streaming industry.
Speak with a Solutions Expert
Thank You for connecting with NewTek!
A NewTek representative will contact you shortly.